DYNO TENSILE (100 N TO 10 KN) – UNIVERSAL TESTING MACHINE FOR TENSILE, COMPRESSION, BENDING AND SHEARING TESTS

02 Sep DYNO TENSILE (100 N TO 10 KN) – UNIVERSAL TESTING MACHINE FOR TENSILE, COMPRESSION, BENDING AND SHEARING TESTS

DYNO Tensile is the ideal tool for anyone needing low load instruments. It’s equipped with standard or customised accessories, depending on the fastenings required by the application. The DYNO Tensile model is a machine with a versatile design, normally dedicated to plastic, rubber, fabric, paper, and cardboard tubes.

Drive: Servo-Electric
Operation: Automatic, Semi-automatic, Manual.

The DYNO machine is a really Universal machine, and is designed for operation in compliance with the main world standards on tests methods based on the specific applications.

Standards of reference and applications: ASTM E4, ISO 7500-1  EN 10002-2, JIS B7721, GB/T 16825.1 DIN 51221, BS 1610 and/or equivalent

The EASYQS software is the same that is also used for the AURA range (high load tests) and the DYNO range (very low load tests):

Our system is based on several cards (for axis control + cell readers) with Canbus connection, for displacements to position or force, with 1000 Hz feedback speed. The reading of the loading cell therefore takes place 1000 times per seconds, with a minimum resolution of 32,700 divisions (which can be increased by slowing down cell reading).
Operation and numeric control with HDD touch screen computer.
The two-column self-supporting structure with ball screws and the electronics allow sinusoidal profile stress cycles that preserve the integrity of the machine and allow excellent performance, in spite of the ball screw driven movement. DC motor, encoder (or optical scale).
The program has been fully developed by Easydur for Windows 10 platform operation with internal management of archives, statistics and certificates in Excel format, therefore fully modular and customisable by the customer.
The capacities of the optional loading cells can be combined based on individual needs (100 N to 10 KN). The cells are selected using the software and are protected from overload even when not in use. The release of the axis is automatic in case of out of scale value or unforeseen impact.
Built-in cell sagging compensation. Adjustable testing speed.
Simple use: The test can be completed simply using the buttons of the front panel, without need to access the previously set programs.

Dyno Tensile was designed to allow our customers to operate in full compliance with the INDUSTRY 4.0 philosophy, thanks to the possibility of interfacing the machine with the company management software of the customer.

 

Accessories (available separately)

  • Self-tightening or pneumatic grippers for tests on flat or round materials
  • Grippers of different shapes depending on the material to be tested
  • Optical, automatic and manual strain gauges for elongation tests
  • Ovens and climatic chambers for temperature tests.

 

Results obtainable for traction tests:

  • unit tensile stress
  • deformations (elongations)
  • modules
  • yield characteristics
  • break characteristics

 

Tensile test stop conditions:

  • maximum elongation
  • desired drop in stress
  • Maximum force

 

Characteristics

  • absolute automatic reset
  • relative reset with respect to opening
  • test diagram
  • easily readable and exportable ASCII archive
  • elasticity and rigidity diagrams
  • interface for acquisition of external data such as gauges, comparators, etc.
  • integrated network card, USB
  • electronic handwheel for manual movements with precision 0.003 mm
  • media, sigma, Gaussian curves, CP, CPK